PLANET EPL-1000 - Manual (Page 8)


Installation Overview
The installation consists of the following procedures. Each procedure will be
explained in detail in the following sections:
Step 1: Mount the system into the desired location of a rack.
Step 2:
Connect to the AC power supply, and then check the voltage. Make
sure the power is proper for EPL-1000 and plug in the Power.
After executing the previous procedures, please check the cable connection
robustness and correctness before turning on the power supply.
Step 3:
Connect the network cable and optical to EPL-1000.
Step 4:
Connect Console cable to COM port of a computer for CLI
management. Then run the terminal program with the setting shown
below: Please see more details on Chapter 4.2.
Console Setting
Step 1. Mounting the EPL-1000
The position and orientation of the brackets depends on the rack used for
mounting. The OLT can be front-mounted in a standard channel rack; and it can be
shipped with the mounting brackets installed in one of three mounting positions.
Mounting Bracket Orientation (Top View)