PLANET ICA-310 - Manual (Page 8)


Chapter 3. ICA-310 – 30M Infrared Internet Camera
3.1 Package Content
ICA-310 x 1
Power Adapter x 1
Wall Mount Accessories x 1
CD Disk x 1
Quick Installation Guide x 1
Note
1. if any of the above items are missing, please contact your dealer
immediately.
2. Using a power supply with a different voltage that the one
included with the ICA-310 will cause damage and void the
warranty for ICA-310.
3.2 Physical Installation
1. Connect an Ethernet cable
Connect the LAN cable on the ICA-310 to the network device (hub or switch).
Note
In case you need to connect the device to PC or notebook directly,
you should use cross over cable instead.
2. Connect the power source
Please connect the provided power adapter to ICA-310 power connector and
connect the power plug to power outlet. If there is 802.3af PoE switch in your
network, you can connect the ICA-310 LAN cable to this PoE switch to obtain
power. The power adapter is unnecessary when ICA-310 is connected to a PoE
switch.
Note
PoE and DC adapter only can select one of them