Electrolux TINSEB488MRR0 - Manual (Page 13)

E
13
• Before operating your new Microwave Oven make
sure you read and understand this Use and Care
Guide completely.
• Before the Microwave Oven can be used, follow
these procedures:
1. Plug in the oven. Close the door. The oven display
will show
ENJOY YOUR OVEN PRESS CLEAR
AND PRESS CLOCK.
2. Press the
STOP/CLEAR
pad.
:
will appear.
3. Set clock. See below.
To set the clock
• Suppose you want to enter the correct time of
day 12:30 (A.M. or P.M.).
Procedure
Step Press
1. Press set clock.
set
clock
2. Enter the correct time of
day by pressing the
numbers in sequence.
1 2
3 0
3. Press set clock again.
set
clock
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR will appear in the
display. Press the
STOP/CLEAR
pad and re-enter
the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will
intermittently show
ENJOY YOUR OVEN PRESS
CLEAR AND PRESS CLOCK
after the power
is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also
be erased. Simply press
STOP/CLEAR
pad and
reset the clock for the correct time of day.
NOTE
Your Microwave Oven can be programmed
with the door open except for
START and
popcorn.
Stop/Clear
Press the
STOP/CLEAR
to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, press twice.
Before Operating