PLANET ICA-8350 - Manual (Page 45)

3Mega-Pixel Vandal Proof Fish-Eye IP Camera
ICA-8350
45
6.1.5. PPPoE
PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows Internet Camera
connect to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic IP
address. For more PPPoE and Internet configuration, please consult your ISP.
It can directly connect to the xDSL, however, it should be setup on a LAN environment to program
the PPPoE information first, and then connect to the xDSL modem. Power on again, then the
device will dial on to the ISP connect to the WAN through the xDSL modem.
The procedures are
• Connect to a LAN by DHCP or Fixed IP
• Access the device, enter Setting Î Network Î PPPoE as below
PPPoE
To enable or disable the PPPoE service here.
Type the user name for the PPPoE service which is provided by ISP.
User Name
Type the password for the PPPoE service which is provided by ISP.
Password
Shows the IP information got from PPPoE server site.
IP Address / Subnet
Mask / Gateway
Shows the Status of PPPoE connection. Status