Elk Products ELK-951 - Manual (Page 2)

INSTALLATION CONNECTIONS
EGND Connect to a good quality earth ground using a 14-16 gauge wire. Best choices of ground are: Copper or
EARTH galvanized rod (6' or longer) driven into the ground OR a metallic cold water pipe. Do not use PVC pipe!
GROUND If all else fails, a less effective but alternative ground is the screw on the cover of an electrical outlet.
TELCO RING - Connect one side of the Incoming Telephone Line pair. (Commonly colored RED)
LINE 1 TIP - Connect the other side of the Incoming Telephone Line pair. (Commonly colored GREEN)
HOUSE R1 - Connect one side of the pair returning to the House Phone(s). (Commonly colored BLACK)
PHONE 1 T1 - Connect the other side of the pair returning to the House Phone(s). (Commonly colored YELLOW)
J1 Utilizing individual 8 wire modular cord, connect the equipment to be protected (Digital Communicator,
8 PIN RJ Telephone Key Set, etc.) to the modular jack J1. For optimum surge protection the cord should
MODULAR be 3 feet or longer. Pins 4 & 5 are RING and TIP going to the equipment. Pins 1 & 8 are R1 and T1
JACK
returning from the equipment. Pins 2 & 7 are shorted together by a jumper to create closed circuit tamper
loop for supervising the modular plug. To convert to resistored EOL circuits, cut the jumper and attach the
required resistor in series with the jumper.
TEST SET
Earth
Ground
Rod
J1
EOL1
EL
K
-951 SU
R
G
E SU
PPR
ESSOR
W
IT
H
R
J31/
38X JA
C
K
Convenient points for
connecting a telephone
linemans testset
Jumper EOL shorts pins 2 & 7 for
tamper supervision of the plug
Telephone Co.
Demark Block
EGND
To Digital Communicator
Inputs On Control Panel
Eight (8) Wire
Modular Cord
Min. 3 Ft. Long
RING1 TIP1
Not
Used
(TIP) GREEN
(RING) RED
(T1) BROWN
(R1) GRAY
ORANGE
BLUE
YELLOW
BLACK
Incoming Telephone Line
House
Phone(s)
R1 T1 RING TIP
HOUSE TELCO
PHONE LINE 1
Closed loop
for Tamper
LIFETIME LIMITED WARRANTY
Elk Products, Inc. (“Manufacturer”) warrants to the original purchaser (the “Customer”) that the products it manufactures (“Product”) shall be free from defects in material and
workmanship at time of shipment. Manufacturer’s obligations under this Limited Warranty shall be limited to repairing or replacing, at its option, free of charge, any product returned
to Manufacturer freight prepaid. Manufacturer shall have no obligation under this Limited Warranty or otherwise if (1) the Product has been damaged by negligence, accident,
mishandling, lightning or flood, or other Acts of God, (2) the Product has not been operated in accordance with its operating instructions, (3) the Product has been altered or repaired
by anyone outside Manufacturer’s authorized facilities (4) adaptations or accessories have been made or attached to the Product which, in Manufacturer’s sole determination,
have adversely affected its performance, safety or reliability. Products such as batteries and fused transformers have their own warranties, and are not included in this Limited
Warranty.
If a Product should malfunction or fail, contact Manufacturer or one of its authorized distributors for a Return Authorization (RA) number. Returned Products must include a
complete description of the problem, along with the RA number clearly marked on outside of the package. Manufacturer will not be responsible for any unnecessary items included
with any returned Product.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY FOR ANY PRODUCT. MANUFACTURER SPECIFICALLY DISCLAIMS ANY AND ALL OTHER WARRANTIES OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR OF MERCHANTABILITY. MANUFACTURER
SHALL NOT BE LIABLE IN TORT, INCLUDING NEGLIGENCE OR STRICT LIABILITY, AND SHALL HAVE NO LIABILITY AT ALL FOR INJURY TO PERSONS OR
PROPERTY. MANUFACTURER’S LIABILITY FOR FAILURE TO FULFILL ITS OBLIGATION UNDER THIS LIMITED WARRANTY OR ANY OTHER LIABILITY IN
CONNECTION WITH A PRODUCT SHALL BE LIMITED TO THE AMOUNT OF THE PURCHASE PRICE RECEIVED BY MANUFACTURER FOR THE PRODUCT. THE
REMEDIES STATED IN THIS LIMITED WARRANTY ARE THE CUSTOMER’S EXCLUSIVE REMEDIES AGAINST MANUFACTURER REGARDING ANY PRODUCT.
UNDER NO CIRCUMSTANCES SHALL MANUFACTURER BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING
LOST PROFITS AND REVENUES, INCONVENIENCE OR INTERRUPTIONS IN OPERATIONS, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSSES OF ANY
KIND. THESE LIMITATIONS AND DISCLAIMERS ARE NOT MADE BY MANUFACTURER WHERE PROHIBITED BY LAW. SOME STATES PROHIBIT LIMITATIONS
OF WARRANTIES AND THE CUSTOMER MAY HAVE ADDITIONAL RIGHTS IN THOSE STATES.
For more information contact your local Distributor or: ELK Products, Inc. - PO Box 100 - 3266 US Hwy. 70 West - Hildebran, NC, - 28637 - USA - 828-397-4200