PLANET VC-202A - Manual (Page 24)

24
Coaxial Cable
Up to 3.0km
Router
Switch
VDSL2 CPE Converter VDSL2 CO Converter
Internet
VDSL2
100Base-TX UTP
VDSL2 Coaxial Cable VDSL2
Figure 3-3: VC-202A LAN to LAN connection
3.1.2 VC-201A / VC-204 Connect to Multi-Port Master
To built up a local Internet in apartment, hotel, campus and
hospitality environment.
The Multi-port Master (for example, VC-820M VDSL2 Switch)
need to be placed in the wiring center (MDF room) and connect
to the telephone line system, on the other hand, need to install
a Slave (VC-201A / VC-204 CPE) converter on the individual
client side and connect to the Multi-port Master through the
telephone lines.
When deciding where to put the converter then you must
ensure:
It is accessible and cables can be connected easily.
Cabling is away from sources of electrical noise such as
radios, transmitters and power lines and fluorescent lighting
fixtures.
Water or moisture can not enter the Converter.
Air flow around the unit and through the vents in the side
of the case is not restricted (company recommend that you
provide a minimum of 25mm inch clearance)
To prolong the operational life of your units:
Do not place objects on top of any unit or stack
l
l
l
l
l