PLANET WAP-8000 - Manual (Page 10)

10
Web Configuration
WAP-8000 provides a user friendly interface for users to configure via web browser.
Please follow the below steps to configure WAP-8000 basic settings.
1. It will take a few seconds to complete the boot up sequence after power on
from PoE.
2. Before configuration of WAP-8000, please note that your PC’s IP address should
be on the same IP subnet (http://192.168.1.x) of the WAP-8000 (Please follow
the manual for assign a static IP address to set same IP subnet).
3. Open your web browser.
Default IP Address: http://192.168.1.1
Default IP subnet mask: 255.255.255.0
WEB login User Name / Password: admin
4. After enter the password, you can see the login web page.