Appendix b: configuring the pc in windows 7 – PLANET WDRT-730 User Manual
Page 95
Advertising
User Manual of WDRT-730
-88-
Appendix B: Configuring the PC in Windows 7
In this section, we’ll introduce how to configure the TCP/IP correctly in Windows 7. First make sure
your Network Adapter is working, refer to the adapter’s manual if needed.
1) On the Windows taskbar, click the Start button, and then click Control Panel.
2) Click
the
Network and Sharing Center icon, and then click the Change adapter settings
on the left side of the screen.
Figure B-1
3) Right click the icon of the network adapter shown in the figure below, and select Properties
on the prompt window.
Advertising