PLANET WNRT-625 - Manual (Page 27)

WDS Mode: Select Bridge Mode or Repeater Mode.
Phy Mode: It provides 4 options, including CCK, OFDM, HTMIX, and GREENFIELD.
Encryp Type: It provides 4 options, including None, WEP, TKIP, and AES.
AP MAC Address: It provides 4 AP MAC Address. Enter the MAC address of the other APs.
WDS (Wireless Distribution System) allows access points to communicate with one another
wirelessly in a standardized way. It can also simplify the network infrastructure by reducing the amount
of cabling required. Basically the access points will act as a client and an access point at the same
time.
WDS is incompatible with WPA. Both features cannot be used at the same time. A WDS link is
bi-directional, so the AP must know the MAC address of the other AP, and the other AP must have a
WDS link back to the AP.
Dynamically assigned and rotated encryption key are not supported in a WDS connection. This means
that WPA and other dynamic key assignment technologies may not be used. Only Static WEP keys
may be used in a WDS connection, including any STAs that are associated with a WDS repeating AP.
Enter the MAC address of the other APs that you want to link to and click enable.
Supports up to 4 point to multipoint WDS links, check Enable WDS and then enable on the MAC
addresses.
Example of a WDS topology:
AP1 <-- WDS --> Master AP (our AP) <-- WDS --> AP3<-- WDS --> AP4
HT Physical Mode
Operation Mode: Select Mixed Mode or Green Field.
Channel Bandwidth: Select 20 or 20/40.
Guard Interval: Select Long or Auto.
27