Eclipse - Fujitsu Ten CD8445 - Manual (Page 154)

154
How to operate the AREA SHOT function (U.S.A. only)
Reading the AREA SHOT data
The AREA SHOT data that has been downloaded from E-iSERV (web
site) to a Memory Stick or CD-R can be loaded into the deck and saved
there.
Press the [FUNC] button for less than one second.
The function mode is activated.
Turn the [SEL] button to select AreaShot.
Press the [SEL] button.
The media selection screen appears.
Turn the [SEL] button to select Disc or Memory Stick.
The selected item will be highlighted.
Press the [SEL] button.
The panel opens automatically.
Insert the Memory Stick or CD-R to be used for read the
Area Shot data.
Press the [OPEN] button to close the front panel.
If a CD-R has been inserted, the panel closes automatically.
After the panel is closed, files in the CD-R or Memory Stick are read.
While files are being read, the [READING...] message appears. If
there are no correct files on the CD-R or Memory Stick, "No DATA"
is displayed.
[SEL] button
[FUNC] button [OPEN] button
CD8445.book 154 ページ ２００４年１２月１３日 月曜日 午前１１時３０分