PLANET NVR-401 - Manual

NVR-401 NVR-401
their respective owners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: [email protected] www.planet.com.tw
Quick Guide Quick Guide
2011-AB5280-000
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus NVR-401. If any item is missing or damaged, please contact the seller immediately
STEP 1 : Physical Installation
STEP 2 : Web Management
Power Adapter CD-ROM Power Cord Quick Installation Guide 8 x HDD Screw RJ-45 Cable
Login the Homepage
The Web management allows you to access and manage the Network Video Recorder easily. Launch the Web browser and enter the IP address. The
default IP address is 192.168.0.20. Fill in the User Name and Password to login the Web management. The default User Name / Password is admin /
admin.
Install the Hard Disk Drive
1. Remove the screws on the bottom. 2. Pull out the case inside.
3. Connect the SATA bus cable and power cable to the HDD.
4. Lock the HDD with bundled HDD screws on both sides.
7. Connect the bundled power adapter to the power connector on the rear panel.
8. Press the power button to power on.
5. If there is a second HDD, please repeat step 3 and 4. 6. Place the inside housing back and secure it with the
screws in step 1.
Further configurations and information can be found in the user’s manual CD. Please check the user’s manual for more
information.