PLANET IPX-300 - Manual (Page 22)

select will hear On / Off duty voice, default settings is “Enable”.
(For how to record On/Off duty voice please refer “ Record
Voice Menu ”).
Incoming call attendant
Choose a pre-set hunt groups, default is “blank”. There are 3
types of combination setup.
1. If On duty/ Off duty voice is “Enabled”, after caller hear
the voice menu one time, the call will be transferred to
the pre-defined group for call attendant.
2. If On duty/ Off duty voice is “Disabled”, caller will not
hear the voice menu, the call will be directly transferred
to the pre-defined group for call attendant.
3. If On duty/Off duty voice is “Enabled” and no group is
pre-defined, voice menu will repeat itself until incoming
caller respond to it.
(For how to make hunt group please refer “ Hunt Group
Setting ”)
Table 3-9. Service provider advance setup description
Trunk Management – Gateway Trunk
Gateway Trunk Setting allows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If
the FXO ports of external Gateway have connected with PSTN lines, the user can make outgoing
PSTN calls via external Gateway by this function.
Figure 3-10. Gateway Trunk setting
IP
Destination IP Address is the IP address of the destination
Gateway that owns this phone number.
Port Port is port of the destination Gateway use. (Default is 5060)
Table 3-10. Gateway Trunk setting description
Trunk Management – Trunk Group
Trunk Group is defines the leading digit of the call out dialing number through SIP Trunk or Gateway
Trunk. The IP PBX will according to the leading digit to determine to use which SIP or Gateway Trunks
22