5 mac clone, 6 status – PLANET PRT-301W User Manual
Page 16
12
Backup Settings /
Restore Settings
Use the "Backup Settings" tool to save the current configuration to
a file named "config.bin" on your PC. You can then use the
"Restore Settings" tool to restore the saved configuration.
4.1.5 MAC Clone
Host Name
It is an optional setting, but may be required by some Internet Service
Provider.
MAC Address
By default, this field is set to the MAC address of PRT-301W
’s WAN port.
If required by your Service Provider, you can also use the "Clone MAC
Address" button to copy the MAC address of the Network Interface Card
installed in your PC and replace the WAN MAC address.
4.1.6 Status
This page shows you the connection status for the PRT-301W's WAN/LAN interfaces, firmware
and hardware version numbers, and the number of connected clients to your network.