PLANET MH-2300 User Manual
Page 216
Gigabit Multi-Homing VPN Security Gateway
MH-2300
216
In
the
New Rule Properties dialog box, click the Authenticaion
Methods tab. Next, select “Kerberos” from the Authetication
method preference order and then click Edit.
In the Edit Authentication Method Properties dialog box,
follow the steps below:
z Tick the box of “Use this string (preshared key)” and enter
“123456789” in the corresponding field.
z Click OK to complete the settings.
Select “Preshared Key” from the Authentication method
preference order.
In
the
New Rule Properties dialog box, click the Tunnel Setting
tab:
Select the radio box of “Tunnel endpoints are specified by
these IP addresses”.
Specify the IPv4 tunnel endpoint, i.e., 211.22.22.22.
In
the
New Rule Properties dialog box, click the Connection
Type tab:
Tick the box of “All network connections”.
Click
Apply.
Click
OK to complete the settings.
Select “VPN_B Remote To Local” from the IP Security rules.