PLANET DKVM-1708 - Manual

Quick Guide Quick Guide
DKVM-1708
DKVM-1716
DKVM-1708
DKVM-1716
2011-F00250-000
PLANET Technology Corporation
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: [email protected] www.planet.com.tw
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2011 PLANET Technology Corp. All rights reserved.
Screw CD-ROM KVM Cable Quick Installation Guide Power cord
STEP 1 : Mount the LCD to the rack STEP 2 : Install front and rear bracket on
cabinet (Both sides)
STEP 6 : Pull and turn the lock knobs (left and right at the
same time) then put out the screen and open
console to operate
STEP 3 : Screw the KVM module into the console
from the back
STEP 5 : Finish installation as below
STEP 4 : Please fix KVM module with the rack
mount bracket kit
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package box should contain the items indicated below plus DKVM-1708/DKVM-1716. If any item is missing or damaged, please contact the seller
immediately
Bracket kit
x 8
Specification
Display Size 17 inches
Chassis Construction Heavy duty steel materials
Panel Type 4CCFL LCD Panel
Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch Supports 0.264(H) x 0.264(V) / 0.294(H) x 0.294(V)
Backlight lifetime 50,000 hrs
Operating System
Windows 98SE/ME/2000/XP/2003/Vista/7 Server, Linux, Mac OS9/OSX
and Sun Microsystems.
Multi Platform Support PS/2 and Combo-Free KVM module
Keyboard Mouse 105 key keyboard with touch pad
Keyboard Language English
Touch pad 1000 points/inch (40 points/mm) - graphics tablet mode
KVM Switch Module PC Connectors
Video: 8/16 HDB-15 female
KB/MS: PS/2 & USB signal combined
Rail slide Dimensions 45 cm (extended length 22cm) - standard
Power adaptor Universal 100~240V AC input
Caution:
1. At least two installers while installing the KVM drawer device.
2. During the installationplease prevent from the device falling
It may damage the device or cause injury of the installer.
OSD (On Screen Display)
Press the NumLock on the keyboard twice or simultaneously press the Push Buttons 1 and 2 of the Port Selection Switch on the KVM panel to start the OSD.
Use the Up, Down and Enter keys on the keyboard to switch or directly move the mouse to the target PC, and then double click the left button.
For more information about your DKVM-1708/DKVM-1716, please also refer to the user's manual.
Knobs
KVM Module
KVM Drawer
Unlock
Lock
Knob