2 hardware installation – PLANET ENW-9701 User Manual
Page 6
Advertising
2.2 Hardware Installation
Step 1
: Please turn off your PC.
Step 2
: Remove any metal decorations from your hands and wrists.
Step 3
: Remove the cover from your PC.
Step 4
: Locate an empty PCI Express slot and remove the corresponding back plate. Save the
screw for use in Step 6.
Step 5
: Carefully insert the adapter into the chosen slot and press firmly with proper push to
ensure it is fully seated in the slot.
Step 6
: Secure the adapter with the screw you saved in step 4.
Step 7
: Replace the PC cover.
Step 8
: Power on the PC and refer to next chapter to install the driver of this adapter.
9
Advertising