PLANET FPS-1010 - Manual

1
This Quick Installation Guide contains brief instructions for the following environments:
• Windows 95/98/Me/NT/2000/XP/Sever 2003 Peer-to-Peer Networks
• Macintosh (AppleTalk)
For other environments, or any problems, please refer to the full User’s Manual in the
CD-ROM.
Package Content
1 x Print Server
1 x Quick Installation Guide
1 x Drivers and User’s Manual CD
1 x Power Adapter
Physical Installation
1. Make sure the power is OFF then connect printer to the Print Server’s printer
port.
2. Connect the LAN cable to the proper connector of the Print Server.
3. Connect the other end of the LAN cable to a switch or your PC directly.
4. Connect the supplied Power Adapter.
5. Please make sure the LAN LED is light on.
Print Server Setup
In the following situation, you do not need to configure the Print Server. Just follow the
procedures on section “Administrator PC Setup” to share your printer. If you want to install
print server to a client PC, you may refer to our manual in the CD-ROM.
Windows users:
• Already installed TCP/IP protocol.
Apple Macintosh users:
• Already installed AppleTalk protocol.
Administrator PC Setup
>>Windows Peer-to-Peer Printing
Install Peer-To-Peer Print Driver
1. Insert Drivers and User’s Manual CD into the CD-ROM drive to initiate the au-
torun program. Once completed a menu screen will appear.