PLANET IKVM-17080 - Manual (Page 33)

27
Local Keyboard
Used to change the language mapping of your browser machine running the Remote
Console Applet. Normally, the applet determines the correct value automatically.
However, depending on your particular JVM and your browser settings this is not
always possible. A typical example is a German localized system that uses an
US-English keyboard mapping. In this case you have to change the Local Keyboard
setting to the right language, manually.
Hotkeys
Opens a list of hotkeys defined previously. Choose one entry, the command will be sent
to the host system.
A confirmation dialog can be added that will be displayed before sending the selected
command to the remote host. Select “OK” to perform the command on the remote host.
30B
4.3.2 Remote Console Status Line
The Remote Console Status Bar shows both console and the connection state. The size
of the remote screen is displayed. The value in brackets describes the connection to the
Remote Console. “Norm” means a standard connection without encryption, “SSL”
indicates a secure connection.
Furthermore, both the incoming (“In:”) and the outgoing (“Out:”) network traffic are
visible (in B/s). If compressed encoding is enabled, a value in brackets displays the
compressed transfer rate.