PLANET UMG-2000 - Manual (Page 19)

1
Item Description
PPTP Server Specify the PPTP server IP address.
Login Name Specify the username to login to the PPTP server.
Password
Specify the corresponding password to login to the
PPTP server.
Confirm Password Retype the password.
Static IP Address Specify whether you have a static WAN IP address.
IP address Specify whether you have a static IP address.
Subnet Mask Address
Specify your static WAN IP address if you have enabled
the “Static IP Address”.
DNS Server Address
Specify the subnet mask address if you have enabled
the “Static IP Address”.
MAC Address Show MAC address information
Step 4: Setting the Wireless Network
This page allows the administrator to quickly setup the wireless Access Point (AP).
Specify the wireless configuration and then click the button “Next” to go to step 5.
Item Description
Access Point (AP) Enable or disable the wireless AP service.
Hide SSID
Decide whether or not to make the wireless AP SSID
visible.
Network Name (SSID) Specify the preferred SSID name string.
Wireless Region Select the area of location yours.
Wireless Mode
Select the preferred wireless AP mode:
802.11b / 802.11g / 802.11n.
Channel Select the preferred wireless channel number.
Authentication Type
Specify the authentication type:
Open system / Shared Key / WPA / WPA2.
Data Encryption Select the Data Encrypt type.
Encrypt Strength Select the encrypt strength.
Security Key Specify the key for the clients to access this AP.