ProSoft Technology MVI56-LTQ User Manual
Page 70
Advertising
Reference
MVI56-LTQ ♦ ControlLogix Platform
User Manual
Limitorque Valve Actuator Master Communication Module
Page 70 of 98
ProSoft Technology, Inc.
August 30, 2010
This type of connection can be used to connect the module to a computer or field
device communication port.
RS-232: Null Modem Connection (No Hardware Handshaking)
Note: For most null modem connections where hardware handshaking is not required, the Use
CTS Line parameter should be set to N
and no jumper will be required between Pins 7 (RTS) and 8
(CTS) on the connector. If the port is configured with the Use CTS Line set to Y, then a jumper is
required between the RTS and the CTS lines on the port connection.
Advertising