ProSoft Technology MVI56-BSAPS - Manual (Page 24)

MVI56-BSAPS ♦ ControlLogix Platform Module Configuration
Bristol Babcock Serial Slave Module
Page 24 of 83 ProSoft Technology, Inc.
September 22, 2008
After completing the module setup, the Controller Organization window will
display the module's presence. The data required for the module will be defined
to the application, and objects will be allocated in the Controller Tags data area.
The following example shows the Controller Organization window.
Next, define the User Defined Data Types to be used with the module. Copy
these data types from the example ladder logic if you are not using the example.
They will be defined if you are starting from the example ladder logic. The
Controller Organization window should display the User Defined Data Types
shown in the following example:
Next, define the data to be used to interface with the module and the ladder logic.
Open the Controller Tags Edit Tags dialog box and enter the values required for
the application. You can set the tag name to any valid tag name you desire. If
you are using the example ladder logic, this step has already been performed.
The last step in the module setup is to add the ladder logic. If you are using the
example ladder logic, adjust the ladder to fit your application. If you are not using
the ladder example, copy the ladder logic shown in the Controller Organization
window below to your application.