ProSoft Technology AN-X-AMX - Manual (Page 38)

Page 34 AN-X-AMXRIO November 2011
This command resets the AN-X. You will receive a warning and be given the
opportunity to Cancel the command.
If you cancel at the filename dialog, the AN-X has already been reset and is in boot
mode. Use the Utilities/Restart AN-X command to restart it in production mode.
Update Firmware
There are two ways to update the firmware in an AN-X module.
1. The Configuration/Firmware Update command starts the firmware update
wizard, which takes you step by step through the firmware update process.
2. The Utilities/Update Firmware command updates the firmware on an AN-X
you have selected using the Utilities/Select An AN-X command.
Firmware files have extension bin.
Firmware Update Wizard
Select the Configuration/Firmware Update command to start the firmware update
wizard.
Step 1:
In step 1, you identify the AN-X you are configuring.