Loading film – Royal Sovereign RSH 380SL User Manual
Page 5
Advertising
4
5. LOADING FILM
Picture 1
Picture 2
Picture 3
Picture 4
1. As shown in picture 1, insert auto grips onto the upper/lower film shaft.
2. As shown in picture 2, using the special tool, fix the auto grips on the
film shaft with set-screws.
3. Set the glossy side of the upper and lower film towards the heat rollers.
( Glossy side is PET film and matte side is thermal polymer laminating
adhesive)
4. Center film as shown in picture 3 and 4.
Advertising