Epson 900 - Manual (Page 20)

20
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
L Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
Ink cartridge problems
If output quality does not improve even after cleaning and aligning
the print head, you may need to replace one or both of the ink
cartridges.
To replace an ink cartridge before the B black or A color ink out light
flashes, follow these steps.
If the B black or A color ink out light is flashing or is on, replace the
empty ink cartridge as described in “Replacing Ink Cartridges” in
your Setup & Daily Use manual.
c Caution:
❏
Once you remove an ink cartridge, it becomes unusable and
cannot be reinstalled even if ink remains.
❏ Leave the old cartridge installed in the printer until you are
ready to replace it with a new one.
1. Make sure the printer is on. The P power light should be on, but
not flashing.
2. Lower the output tray; then open the printer cover.
3. Hold down the E load/eject button for three seconds; the print
head moves to the black cartridge replacement position. The
P power light begins flashing.