Edifier Enterprises Canada R401 - Manual (Page 4)

CONNECTING
SPECIFICATIONS:
1
2
3 Playing the audio device
CONNECTING
Connect the satellite speakers to the output splints on the back panel of the Sub-woofer. Please note to match
the color, red to red and white to white.
Connect the subwoofer to the Audio device.
Using Audio connecting cord , connect the Line-input port of the subwoofer to Line-out of the Audio Device
(Such as the computer, Discman, etc).
Plug the AC power plug into the wall outlet and turn on the power switch, Now your speaker system is ready for
Use. Adjusting the volume control and the Super bass,then you can enjoy the music.
R401
Multimedia speaker
Speaker Output
OFF ON
L
SOUND CARD
Line In
Spk Out
Sound Card
LINE IN
WHITE
RED
R
POWER
Total Power Output :
Input Impedance:
Input Sensitive:
Bass Unit:
M
Tweeter Unit:
Frequency Response:
Dimension(Subwoofer):
Dimension(Satellite):
Gross Weight:
id-range Unit:
RMS 8W x 2 + 30 W
10K Ohm
450 mV
Aluminum coil, 4 Ohm
3 Paper coil, 4 Ohm
1
42 Hz ~ 20 KHz
191(W) x 293(H) x 285(D)mm
96(W) x 167(H) x 106(D)mm
About 8.2 Kg
6 1/2
PV membrane dome
Connected
with AC power