Emerson CR500 - Manual (Page 6)

5
OPERATION
USING THE THERMOSTAT
1
The Thermostat for the refrigerator and freezer is
located at the upper right hand corner of the
refrigerator compartment.
The first time you turn the unit on, adjust the
temperature control knob to “3” and give your
refrigerator time to cool down completely before
adding food; a full 24 hours is recommended.
After it is fully cooled, test it and adjust towards 1
to make less cool or towards 6 to cool more to
best suit your needs. However, the setting of 3
should be appropriate for home or office
refrigerator use.
NOTE: Turning the temperature control knob to
the OFF position will stop the cooling cycle but
does not shut off the power to the unit.
USING THE LOCK
1
1. Insert the key (two keys are provided) and then
push and turn clockwise to lock the freezer and
refrigerator doors.
2. Insert the key and then push and turn counter-
clockwise to unlock the refrigerator and freezer
doors.
NOTE: If the key does not lock the refrigerator
and freezer doors properly, you will need to adjust
the lock holes by GENTLY pushing/pulling on the
respective door to adjust.