Yamaha CVP-705B - Manual (Page 30)

CVP-709/CVP-705 Owner’s Manual 30
Bas
ic O
per
at
ion
s
 Rotate
Touch and hold the display knob, and rotate your finger around
the knob to change the parameter value.
 Touch and hold
This instruction means to touch the object in the display and
hold it for a while.
When setting values by using []/[], a slider or a knob, you
can restore the default value by touching and holding the value
on the display.
Rotating the Data Dial
Depending on the display, the Data dial can be used in the following two ways.
 Adjusting the parameter values
After selecting the desired parameter, use the Data dial to adjust the value. This is useful if you have
difficulty adjusting by touching on the display, or want finer control over the adjustment.
 Selecting an item from a list
In File Selection displays (page 27) and the List windows for setting parameters, use the Data dial to select
an item.
Pressing the [HOME] Button
You can quickly return to the Home display (the display shown when the power is turned on) by pressing
the [HOME] button whenever you want.
Data dial