Alto Professional TSL115 - Manual (Page 27)

27
Appendix (English)
Technical Specifications
Output Power 800 W peak (670 W LF + 130 W HF)
400 W continuous RMS (335 W LF Class D + 65 W HF Class AB)
Low Frequency 15” (381 mm) woofer, 2” (51 mm) voice coil
High Frequency 1” (25 mm) neodymium driver
Crossover 2 kHz
Maximum SPL 122 dB continuous, 125 dB peak (@ 1 m)
Frequency Response 48 Hz – 18 kHz (@ -10 dB)
Coverage 80°/100° H x 60° V nominal
Connectors (1) 1/4” TRS or XLR input
(1) XLR Link Output
Light Type: 72 tri-color (red-green-blue) high-intensity LEDs; 22 W total;
sound-reactive
Modes: Mood, Meter, Mix, Pulse, Party
Controls: Mode selection knob; color selection knob with RGB
preview LED; brightness knob
Cabinet Trapezoidal polypropylene housing
External Control Volume control, power-on with LED, clip limiter with LED, ground
lift
Power AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T1.6AL AC250V / 220-240 V T800mAL AC250V
Inrush current at initial switch-on: 3.61 A
Inrush current after power supply interruption: 3.91 A
Dimensions
(width x depth x height)
26.7” x 16.9” x 15.2”
679 mm x 430 mm x 385 mm
Weight
41.0 lbs.
18.6 kg
Specifications are subject to change without notice.
Trademarks and Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other
countries. All other product or company names are trademarks or registered trademarks of
their respective owners.