EverFocus eDR1680 Series - Manual (Page 27)

27
6.4.2 System-Hard Disk Setup
HDDs Auto Overwrite
To set auto overwrite when HDD is full. Default value is “OFF”. If the setting is “OFF”, the DVR
stop recording when HDD is full.
HDD Full Action
To define the behaviors when HDD is full.
Triggered when HDDS are full and available space <: XX%. Default value is 10%.
Alarm Output: N/A, 1~8. Default value is N/A.
Buzzer: ON/OFF. Default value is OFF.
Duration: Duration time 00~99 seconds. Default value is 10 seconds.
Log: Log to event log list or not. Default value is “OFF”.
Show Message: To display alarm message or not when HDD is full. Default value is “OFF”.
E-mail: To activate the e-mail notification or not when HDD is full. Default value is “OFF”.