Edimax Technology AR-7266WNA - Manual (Page 97)

88
Metric Defines the number of hops between network nodes that
data packets travel. The default value is 0, which means
that the subnet is directly one hop away on the local LAN
network.
Interface The WAN interface to which a static routing subnet is to
be applied.
Add Route Add a user-defined destination route.
Show Routes Click this button to view the router’s routing table.
Static Route Table Click “Update” to update the selected destination route
on the “Static Route Table”. Click “Delete Selected” to
delete a selected destination route on the Static Route
Table.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.7.6. ACL Configuration
The Access Control List (ACL) is a list of permissions attached to the router. The
list specifies who is allowed to access this router. If ACL is enabled, all hosts
cannot access this router except for the hosts with IP address in the ACL table.