Edimax Technology PS-1206PWg - Manual (Page 118)

108
8.4.3 TCP/IP
You can configure the print server to automatically get IP
from DHCP server or manually specify static IP. The print
server also has a built-in DHCP server. You can enable
this DHCP server and let it manages IP for you.
If you need the print server to automatically get an IP from
DHCP server, select “Enable Obtain TCP/IP Settings
Automatically (Use DHCP/ BOOTP)”. You also can select
“Disable Use the following TCP/IP Settings” to manually
assign “IP Address”, “Subnet Mask” and “Gateway” for the
print server.