Disc playback, Disc playback 05, Chapter 5 – Pioneer X-CM56 User Manual

Page 16: Playing discs or files

Advertising
background image

Disc playback

05

16

En

Chapter 5:

Disc playback

This system can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was
used for recording.

• For details about MP3, see page 33.

Playing discs or files

Load the disc

1

Press Í to turn the power on.

2

Press CD on the remote control or INPUT

repeatedly on the main unit to select CD input.

3

Press < on the main unit to open the disc tray.

4

Place the disc on the disc tray, label side up.

5

Press < on the main unit to close the disc

tray.

Play tracks on a CD

1

When the recognition is completed, press

1; .

After the last track is played, the unit will stop automatically.

Play MP3 music files

MP3 track data is called “music file” and the location they are
stored is called a “folder” in this document.

1

When the recognition is completed, press

/ to select the folder where the music file is

stored ([ ]), then press or ENTER.

• Repeat this step if there are other folders inside the

selected folder.

• To return to the previous folder, press

or

.

2

Press / to select the music file ([ ]), and

then press 1; or ENTER.

• Once play starts, only music files inside the same folder

can be played continuously.

CAUTION

• Do not place two discs in one disc tray.
• Do not play discs of special shapes (heart, octagon,

etc). It may cause malfunctions.

• Do not push the disc tray whilst it is moving.
• If the power fails whilst the tray is open, wait until the

power is restored.

• Be sure to place 8 cm disc in the middle of the disc tray.

Note

• Due to the structure of the disc information, it takes

longer to read an MP3 disc than a normal CD
(approximately 20 to 90 seconds).

• When the beginning of the first track is reached during

fast reverse, the unit will enter the playback mode (only
for CD).

• If TV or radio interference occurs during CD operation,

move the unit away from the TV or radio.

Tip

• When no operation has done in CD mode and the audio

file is not played for more than 20 minutes, the power
will automatically turn off. In this case it is required that
the Auto power off is switched to ON.

• Auto power off can be switched to ON/OFF (page 34).

e.g.,

SN29402593_X-CM56&56D_En.book 16 ページ 2016年5月27日 金曜日 午後3時47分

Advertising