Trouble shooting guide – Braun CareStyle 5 Pro IS 5055 User Manual

Page 12

Advertising
background image

Trouble shooting guide

PROBLEM

CAUSE

REMEDY

The appliance does not switch on.

The appliance is not plugged into a

mains socket.

Make sure the appliance is correctly

connected and press the on/off button.

Steam comes out under the ironing

system.

The “max” pressure safety system has

opened.

Turn the appliance off immediately and

contact an authorised Braun Customer

Services

There are some water drops from the

holes in the bottom of the sole plate.

Water has condensed inside the tubes

because steam is being used for the

first time, or has not been used for

some time.

Press the steam button several times

away from the ironing board. This will

eliminate cold water from the steam

circuit.

Brown coloured fluid leaks from the sole

plate.

Chemical water softeners or additives

have been poured into the water tank or

steam generator.

Never pour products into the water

tank. Clean the sole plate with a damp

cloth.

The first time the appliance is turned on,

you notice smoke or smell.

Some parts have been treated with

sealer/lubricant which evaporates the

first time the iron heats up.

This is normal and will stop when you

have used the iron a few times. If the

smell is still present after turning off the

appliance, contact an authorised Braun

Customer Service.

The appliance emits an

intermittent

noise associated with vibrations.

Water is being pumped into the steam

generator.

This is completely normal

The appliance emits a

continuous

noise associated with vibrations.

Unplug the system from the mains and

contact an authorised Braun Customer

Services.

The cleaning valve is difficult to unscrew Limescale has made the cleaning valve

difficult to open

Turn the cap forcefully. To avoid the

problem, rinse the the system

frequently

After refilling water, the icon does not

reset.

The water float doesn’t work

appropriately

Empty the water tank, rinse out and

refill.

All LEDs are blinking

System error

Unplug the system, plug it in again and

press the on/off button. If this problem

is still present, turn the appliance off

immediately and contact an authorised

Braun Customer Service.

Subject to change without notice.

Please do not dispose the product in the

household waste at the end of its useful life.

Disposal can take place at a Braun Service

Centre or at appropriate collection points

provided in your country

11

DLB236337_CareStyle_5_IS5055_Use_Instruction_INT.indb 11

16.06.15 16:03

Advertising
This manual is related to the following products: