Using the baby monitor, Linking parent unit and baby unit, 10 hrs = 3 hrs – Philips AVENT SCD620/05 User Manual

Page 9

Advertising
background image

20°C

Eco

1

10 hrs

=

3 hrs

- When you charge the parent unit for 3 hours, it can be used cordlessly for

approx. 10 hours.

- If the parent unit is switched on during charging, charging takes

approximately twice as long.

20°C

Eco

1

- When the rechargeable battery of the parent unit is almost empty, the

battery status light turns red and the parent unit beeps.

- If the battery is completely empty and the parent unit it not connected to

the mains, the parent unit automatically switches off and loses contact
with the baby unit.

Note: The built in rechargeable battery cannot be removed from the

product.
Note: The battery gradually and very slowly discharges, even when the

parent unit is switched off.
Tip: To save battery, switch off the parent unit when you do not use it.
Note: We advise you to keep the parent unit connected to the mains during

the whole night. If the battery of the parent unit runs low during the night,

the parent unit beeps and this may wake you up.

Using the baby monitor

Linking parent unit and baby unit

1 Push the on/off slide on the baby unit upwards to the ON position.

9

English

Advertising