Evo Fitness 53553 - Manual (Page 14)

Step 7:
Slide a 1-1/4" Foam Pad (29) onto the left
Press Arm (16). If the Foam Pad (29) is
difficult to slide onto the Press Arm (16)
try applying a small amount of soapy water
to the Press Arm (16) prior to sliding on
the pad. Insert two 3/4" Bushings (51)
into the Left Press Arm (16). Attach the
Left Press Arm (16) to the left side of the
Press Support (14) using a 1/2" Washer
(74) and 1/2" Nylon Nut (76). Secure using
a Pop Pin (57) as shown.
Follow the same procedure to assemble
the Right Press Arm (17) to the Press
Support (14).
assembly instructions
-14-
ASSEMBL
Y