Roland BRIDGE CAST Dual-Bus Gaming Mixer - Manual (Page 28)

Adjusting the Mic Audio
28
Adjusting the Mic Audio
This section explains how to adjust the mic audio.
â Getting Ready to Use a Mic(P.28)
â Calibrating the Mic Sound Quality (Cleanup)(P.30)
â Processing the Mic Audio (Mic Effects)(P.32)
â Saving the Mic Effect Settings as a Preset(P.34)
â Exporting a Mic Effect Preset File(P.37)
Getting Ready to Use a Mic
Here’s how to set the type of mic used and the mic input gain (sensitivity).
â Selecting the type of mic to use
â Adjusting the input gain (sensitivity)
Selecting the type of mic to use
1. On the menu screen, click the “MIC SETUP” tab and set the “MIC TYPE”.
Menu Value Explanation
MIC
TYPE
Select a mic type according to the mic you’re using.
DYNAMIC Dynamic microphone
CONDENSER
(+48V)
Condenser mic
* If you select “CONDENSER(+48V)”, phantom power is supplied from the MIC jack.
* Don’t use the “CONDENSER(+48V)” setting if you are using a dynamic mic. Dynamic mics may
malfunction when supplied with phantom power.
HEADSET Headset