Emerson Process Management BETTIS G01 - Manual (Page 50)

Bettis P/N 124840E
Revision “B”
Page 46 of 46
6.10 G13 TOOL STYLE AND WRENCH SIZE
ITEM
NO.
WRENCH
SIZE
ITEM
QTY
LOCATION OR
DESCRIPTION RECOMMENDED
TOOL STYLE
1-110 1-1/8” 20 Hex Cap Screws Socket
1-120 1-1/8” 4 Hex Cap Screws Socket
1-160 9/16” 12 Hex Cap Screws Socket
1-180 2” Sq. 2 Stop Screws Open End or Adjustable
3-20 3/4” Sq. 2 Tie Bar (female square) Open End or Adjustable
3-40 3/4” Sq. 1 Piston Rod Male Drive
3-90 4-1/4” 2 Standard Hex Nuts Socket
3-100 1-11/16” 8 Hex Cap Screws Socket
3-120 1-7/8” Sq. 1 Pipe Plug Open End or Adjustable
3-130 3/16” 2 Socket Cap Screws Allen
5-20 1-13/16” 8 Hex Cap Screws Socket
7-20 1-1/8” 8 Hex Cap Screws Socket
12 1” 1 Breather Assembly Socket
13 3/4” 2 Vent Check Assembly Open End
- 3/4” 1 Tension rod Male Drive
ECN DATE REV BY * DATE
Released 3 September 1998 A COMPILED B. Cornelius 17 December 2001
17787 17 December 2001 B CHECKED B. Cornelius 17 December 2001
APPROVED R. Smith 17 December 2001
* Signatures on file Bettis, Waller, Texas