Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 41)

41
4
Turn the SELECT knob to move the cursor
to the name of the assign button you want
to assign a function.
5
Turn the VALUE knob to select a function,
and press the VALUE knob.
The function is assigned to the assign button.
Checking the function assigned to an assign
button
When an ASSIGN 1 to ASSIGN 3 button is pressed, the
name of the function assigned to the button is displayed
highlighted on the bottom of the LCD panel for a few
seconds.
Setting Specific
Functions using
Shortcuts (FUNCTION
Menu)
When the IRIS, GAIN, SHUTTER, ASSIGN 4,
ASSIGN 5, or ASSIGN 6 button is pressed on the menu
control block, the setup item and setting of the function
assigned to the button is displayed on the LCD panel.
You can change the setting using the VALUE knob.
This allows you to set some functions more quickly than
by using normal menu operations.
Notes
• Depending on the camera model, the settings
displayed on the unit and camera menu display may
not be the same. In this case, the settings displayed in
the camera menu are the actual settings.
• When changing a setting, there may be some delay
before the display is updated.
Buttons and knobs used for
FUNCTION menu operations
* For details about items saved with a preset number, refer to
the operating instructions of each camera.
Operation Buttons and knobs used
Activate
FUNCTION
menu mode. Press the IRIS, GAIN, SHUTTER, or
ASSIGN 4 to ASSIGN 6 button.
Change the
setting of the
setup menu sub
item. Turn the VALUE knob. Confirmation of
changed settings is not required.
Save settings. Saved on the camera using the camera preset
memory function.*