Specifications – Exmark Mhp3615kac User Manual
Page 14
- 9 -
2. SPECIFICATIONS
2.1 MODEL NUMBER: MHP3615KAC; MHP4815KAC
2.2 ENGINE
2.2.1 Engine Specifications: See your Engine Owner's Manual.
2.2.2 3600 RPM (No Load).
2.3 FUEL SYSTEM
2.3.1 Capacity: 5.0 gal. (18.9 L.)
2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using
the research method, it should be a 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut-Off Valve: 1/4 turn
2.4
SAFETY INTERLOCK SYSTEM
Operator must have transmission in neutral and PTO disengaged to start engine.
Release of OPC levers will cause the engine to stop if transmission is not in neutral
and/or PTO is engaged.
2.5 STEERING/BRAKE CONTROL:
Fingertip drive control levers provide independent speed control, braking, and
neutral to each drive wheel for moving, stopping, and power turning. Parking
brakes are engaged by locking drive control levers in the “brake” position.
2.6 TRANSMISSION:
2.6.1 Peerless 700-070A, five speeds forward and one reverse.
2.6.2
Speed
Range:
1
st
2.0 mph (3.22 km/h)
4
th
4.1 mph (6.60 km/h)
2
nd
2.7 mph (4.35 km/h)
5
th
6.2 mph (9.98 km/h)
3
rd
3.5 mph (5.63 km/h) Rev. 3.1 mph (4.99 km/h)
2.7 WHEEL DRIVE SYSTEM:
Banded double A-Section V-Belts, single topside idlers, and replaceable bolt-on
drive sheaves and brake drums.
2.8 TIRES:
Drive Front
Caster
Pneumatic
(Air-Filled)
Semi-Pneumatic
Size
16 x 6.50-8
9 x 3.50-4
Quantity 2
2
Tread Turf
Master Smooth
Ply Rating
4
Pressure
14 psi (97 kPa)
2.9 DECK
2.9.1
Cutting Width: Model 36 in. ....... 35.25 in. (89.5 cm)
Model 48 in.
47.25 in. (120.0 cm)
2.9.2
Discharge: Right Side
2.9.3
Blade Size:
Model 36 in. ....... 18.00 in. (45.7 cm).....Qty. 2
Model 48 in.
16.25 in. (41.3 cm).................................Qty. 3
2.9.4
Type of Drive: Manual engagement of belt with over-center lock. Belt tension is
adjustable via turnbuckle.
2.9.5
Deck Mounting: Full floating deck is attached to out-front support frame, removable
for service.
2.9.6
Cutting Height: Adjusts in 1/2” (.63 cm) increments from 1.5” (3.8 cm) to 4 1/2” (11.4 cm).