Preparing, Checking the supplied accessories, Inserting the batteries into the remote control – Sony BRAVIA XR X90L 65" 4K HDR Smart LED TV User Manual

Page 9: Removing the lens cap, Step 1

Advertising
background image

9

GB

Preparing

Check the carton to make sure it contains the
following items:

Remote control RM-PJ24 (1)

Size AA (R6) batteries (2)

Lens cap (1)

When you purchase the projector, a lens cap is
on the lens.

AC power cord (1)

Setup Guide (this manual) (1)

Caution when handling the remote control

Handle the remote control with care. Do not drop
it, and do not step on or spill liquids on it.

Do not place the remote control in a location
near a heat source, a place subject to direct
sunlight, or a damp room.

Remove the lens cap before you use the projector.

Notes on the lens cap

When removing the lens cap

When removing the lens cap, hold the parts other
than the catches and pull it toward you. If you pull
while holding the catches, the lens may be
damaged.

When attaching the lens cap

When attaching the lens cap, be sure to hook the
catches of the lens cap on the notches of the lens
to prevent it from falling out.

The positions of the notches on the lens may differ from
the ones shown in the figure.

Preparing

Step 1

Checking the Supplied Accessories

Inserting the Batteries into the Remote
Control

Insert the batteries

side first.

Push and slide to open.

Removing the Lens Cap

Note

Catches

Notch

Catch

Advertising