Escort 75 Detector User Manual
Page 11
Page 11
Controls and Features
As you can see, there are vertical lines after each band designator. Each line
shows a signal being detected. The height of each line shows the relative sig-
nal strength of that signal. The position of the line shows the relative frequency
of the signal within the band.
NOTE
If you use ExpertMeter, the brief signal shown in the power-on sequence
when you turn on your Road Tech 75 will also be in ExpertMeter: an X with a
single vertical line.
A few more examples will help you better see how the ExpertMeter works.
Here ExpertMeter shows 1 strong K-band signal, and three X-band signals,
two strong and one weak.
Here ExpertMeter shows 1 weak Ka-band signal, and three weak X-band sig-
nals.
On very weak signals, there will not be a vertical line at all. This shows a very
weak X-band signal.
ExpertMeter Details:
The band designators (X, K, and Ka) will stay on the
display for a few seconds after the signal has passed. This allows you to see
what the unit detected, even on very brief signals. However, the vertical lines
representing individual signals continuously change (several times a second)
to give you a continuous and instantaneous view of all radar signals present.
NOTE
Even long-time detector users will require a significant time to get familiar with
this new level of information about detected signals.
K X
KA X
X