Epicenter Centercade 16 - Manual (Page 24)

Epicenter, Inc.
Page 24
Once all connections are complete:
•
Power ON the Centerpoint unit.
•
Press the Pause/Break key and choose the port number that the Sun server is attached to and press return.
•
Power ON the Server.
The server is ready for entering the Boot command.
T
ROUBLE
S
HOOTING
If these steps do not allow the Sun to be displayed please follow these steps:
•
Check ALL cable connections using information provided in Cable Connections section.
•
Attach a Multi-Sync Monitor to the External Video Port on the Centerpoint . Using the keyboard and the touchpad
of the Centerpoint to boot the Server and verify the current resolutions of the console and window modes. If they
are not set to 1024x768 70 Hz repeat the above steps that change the resolution.
•
Reboot the Server.
K EYBOARD M APPING
Special keys on the Sun keyboard are mapped to the following on the Centerpoint keyboard.
Sun Key Centerpoint Keyboard
Stop R_CTRL & F1
Again R_CTRL & F2
Props R_CTRL & F3
Undo R_CTRL & F4
Front R_CTRL & F5
Copy R_CTRL & F6
Open R_CTRL & F7
Paste R_CTRL & F8
Find R_CTRL & F9
Cut R_CTRL & F1
Help R_CTRL & H
Right
♦
Right WINDOWS Key
Left
♦
Left Windows Key
Compose WIN CMD
Alt Graph R_ALT