Electro-Voice External Wall-Mount Kit for EVIDTM SE-62 - Manual

SE-42/SE-62
External Wall-Mount Kit
for EVID TM FM-Series
Installation Instructions
SE-42/SE-62 External Wall-Mounting Kit
The Electro-Voice® SE-42 and SE-62 External Wall-Mounting Kits feature a supportive attachment shell that al-
lows for an EVID
TM FM4.2 or FM6.2 (normally flush-mounted) loudspeaker to be externally mounted to a wall to
obtain desired mounting location and sound coverage.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems 02/2008
Part Number LIT000232 Rev 1
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Electro-Voice ®
Step 1: Attach Mounting Bracket to Shell Step 2: Attach Shell to Wall and Mount Loudspeaker
Mounting
Screws (x4)
EVID TM FM Series External Wall Mount Kits
Model Part No. Description
SE-42 ACC000037-000 Kit for Externally Wall-Mounting FM4.2 Loudspeaker
SE-62 ACC000038-000 Kit for Externally Wall-Mounting FM6.2 Loudspeaker
Mounting
Brackets (x2)
Enclosure
Shell
Wall
Loudspeaker
System
Enclosure
Shell
* Note - All hardware to mount Loudspeaker System to Enclosure Shell is included with kit. However, the end customer must
supply all hardware to mount Enclosure Shell to Wall.