2955 im p08,09_gb.pdf – Elta 2955 User Manual

Page 5

Advertising
background image

09.

08.

Do not obstruct the ventilation of the device. Make sure, that no curtains, newspapers,

furniture or any other type of object are blocking the ventilation system of the apparatus.

The ventilation system must be clear of objects at all times! Overheating may lead into

serious damage of the device and reduce its performance and lifespan.

Heat and warmth

Do not expose the appliance to direct sunlight. Make sure that the appliance is not

subject to direct heat sources such as heaters or open fire. Make sure that the ventilation

slots of the appliance are not covered.

Moisture and cleaning

This appliance is not waterproof! Do not immerse player in water. Do not allow player to

come in contact with water. If water gets inside the player it may cause serious damage.

Do not use cleaning agents that contain alcohol, ammoniac, benzene or abrasives as

these could damage the player. For cleaning, use a soft, moistened cloth.

Professional recycling

Batteries and packaging should not be disposed of in the trash. Batteries must be

handed over to a collection centre for used batteries. Separating disposable packaging

materials is ecologically friendly.

SAFETY INSTRUCTIONS

1.

READ INSTRUCTIONS - All the safety and operating instructions should be read before the unit

is operated.

2.

RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future

reference.

3.

HEED WARNINGS - All warnings on the unit and in the operating instructions should be adhered

to.

4.

FOLLOW INSTRUCTIONS - All operating instructions should be followed.

5.

WATER AND MOISTURE - The unit should not be used near water, for example, near a bathtub,

washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

6.

VENTILATION - Openings in the device serve its proper ventilation, are necessary for the

operation and prevent overheating. The unit should be situated so that its location or position

does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that

may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that

may impede the flow of air through the ventilation openings.

7.

HEAT - The unit should be situated away from heat sources such as radiators, stoves, or other

appliances (including amplifiers) that produce heat.

8.

POWER SOURCE - The unit should be connected to power supply only of the type described in

the operating instructions or as marked on the unit.

9.

POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against them.

10.

NON-USE - During longer periods of non-use please disconnect from mains power supply and

antenna.

11.

OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are

not spilled into the enclosure through openings.

12.

DAMAGE REQUIRING SERVICE - The unit should be serviced by qualified service personnel

when:

a. The power-supply cord or plug has been damaged.

b. Objects have fallen into, or liquid has been spilled into the unit enclosure.

c. The unit has been exposed to rain or moisture.

d. The unit does not appear to operate normally. Only use the units and controls as described

in this manual.

e. The unit has been dropped, or the enclosure damaged.

f. The unit displays serious changes in its performance.

13.

SERVICING - The user should not attempt to service the unit beyond that described in the user

operating instructions. All other servicing should be referred to qualified service personnel.

14.

CLEANING - Disconnect from mains power supply before cleaning. Do not use liquid or spray

cleaners, only use a damp cloth. Follow the care and maintenance instructions in this manual.

15.

LIGHTNING - During lightning and longer periods of non-use please disconnect from mains

power supply and antenna.

16.

SAFETY CHECK - After servicing the unit ask the customer service for a safety check.

17.

OVERLOAD - To avoid fire and electric shock do not overload wall outlets and convenience

receptacles.

18.

ELECTROSTATIC DISCHARGE - Disconnect from mains power supply and remove batteries if

unit malfunctions. Reconnect after a short time.

DESCRIPTION AND CONTROLS

1. POWER button

2. POWER LED

3. LIFT button

4. TURNTABLE

5. 45RPM insert

6. TONE ARM REST & LOOK

7. TONE ARM WITH STYLUS

8. CUE LEVER

9. SPEED SELECTOR SWITCH

10. AC POWER CORD

11. AUDIO OUT jacks

MAINS POWER SUPPLY

Plug the AC power cord (10) into a 230V ~ 50Hz wall outlet.

Warnings:

• Before connecting to mains power supply ensure that the data corresponds with the rating plate

(230V ~ 50Hz).

• Do not touch the plug with wet hands.

• During longer periods of non-use (vacancy etc.) please disconnect from mains power supply.

• To avoid damage and the risk of fire and electric shock do not pull the cable when disconnecting

from the mains power supply, always take hold of the plug.

7

11
10

6

4

3

2

5

1

9

8

Advertising