Eltax HT-153 User Manual

Page 30

Advertising
background image

30

This troubleshooting guide may help you find a possible cause of and solution to a problem. If there are still
problems, please contact the local service centre or distributor.

Common sympton

Possible cause

Remedy

i

No function

Mains power is not connected

Connect to mains power outlet

Power is OFF

Turn the power ON.

No playback

No disc is inserted

Insert a disc.

("no disc" will be shown on screen).
Disc is upside down.

Reload disc.

("no disc" will be shown on screen).

The label side should face
upward.

Dirty disc

Clean disc surface.

Deformed/scratched disc

Replace disc.

Condensation in unit

Turn power on for 1-2 hours
before using the unit.

No sound

Wrong audio output setting

Check audio output setting

Sound in one or more

Poor or missing cable connection

Check connections

Speaker(s) is missing

No sound in centre/

Downmix settings are wrong

Change downmix settings

surround speakers

Disc or TV program is recorded

Set prologic II on.

n stereo

Sound on scart connecter

Sound in scart connecter is Volume

Turn the volume up to max..

is very weak or missing

regulated.

(Can only be used without
speakers connected)

No picture

Disconnection of video equipment

Check video connections

Wrong output setting of video output

Check video output setting of
Video output in general setup

PROBLEMS AND POSSIBLE SOLUTIONS

TROUBLESHOOTING

Our DVD players support both burned and original discs, however we reserve the right to refuse faults,
which concern the use of burned discs.

There are some general things, which we recommend you to check before you return your product for
service.

1. Use only discs of high quality.

There is a large range of bad quality discs on the market.
Low quality discs can cause faults during the action of burning a CD or DVD-disc,
which will affect the replay of the disc.

2. Make sure the disc is clean and in no way damaged (also apply for original discs).
3. Check if the burning was done correctly – perhaps burn a new disc at low burning speed (x.1)
4. Check if your product support the disc-format (ex. DVD-R or DVD+R) or file-format (ex. DivX), which you

Use.

Advertising