Settings – EverFocus EZ180 User Manual
Page 10
The camera is set up at factory and normally requires no adjustments.
Sometimes, however, adjustments may be necessary. Please refer to the
following description for the function details.
The IRIS ALC and IRIS Level adjustments are located on the side
circuit board, use a screwdriver to adjust if it’s necessary.
IRIS Level Adjustment
To adjust brightness level –
z
Turn the IRIS Level Adjustment VR counterclockwise to get
darker picture.
z
Turn the IRIS level adjustment VR clockwise to get brighter
picture.
IRIS ALC Adjustment
To select light metering method –
z
Turn the IRIS ALC Adjustment VR counterclockwise for
Average Metering.
z
Turn the IRIS ALC Adjustment VR clockwise for Peak
Metering.
Settings
7
IRIS ALC
Adjustment
IRIS Level
Adjustment
Control Switches