Electrolux 63742 VI - Manual (Page 37)

4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.
5. Remove the bracket D and refit the six smaller
bolts C. Slide out the relevant plastic spacer E.
6. Open the porthole, take out the inlet hose from
the drum.
7. Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.
8. Connect the water inlet hose as described under the
paragraph «Water inlet».
All the different plug caps are supplied with the appliance in
the plastic bag containing the instruction booklet.
37 Installation
C
C
B
D B
C
C
E
132963770_en.qxd 21/07/2008 8.25 Page 37