Elitair MC-I-6090 User Manual

Page 9

Advertising
background image

- 9 -

board, etc.). If the screws and screw anchors are provided with the product, check that
they are suitable for the type of wall on which the hood is to be fixed.

• FIXING THE DECORATIVE TELESCOPIC FLUE
Arrange the electrical power supply within the dimensions of the decorative flue. If your
appliance is to be installed in the ducting version or in the version with external motor,
prepare the air exhaust opening. Adjust the width of the support bracket of the upper flue
(Fig.4). Then fix it to the ceiling using the screws A (Fig.4) in such a way that it is in line with
your hood and respecting the distance from the ceiling indicated in Fig.3. Connect the
flange C to the air exhaust hole using a connection pipe (Fig.5). Insert the upper flue into
the lower flue. Fix the lower flue to the hood using the screws B provided (Fig.5), extract
the upper flue up to the bracket and fix it with the screws B (Fig.4).

USE

• If the apparatus is equipped with the following controls (fig.6A):
A
= OFF
B = SPEED I
C = SPEED II
D = SPEED III
E = LIGHT

• If the apparatus is equipped with the following controls (fig.6B):
A
= LIGHT
B = OFF/SPEED I
C = SPEED II
D = SPEED III
E = AUTOMATIC STOP TIMER – 15 minutes
F = FILTER SATURATION RESET LIGHT

When the “filter saturation” light flashes or comes on without flashing, the anti-grease filters
must be washed. When this operation has been completed, press the key (F) to reset it.
The “automatic stop timer” delays stopping of the hood, which will continue functioning for
15 minutes at the operating speed set at the time this function is activated.

• If the apparatus is equipped with the following controls (fig.6C):
A
= LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
F = AUTOMATIC STOP TIMER - 15 minutes

If your appliance does have the INTENSIVE speed function, press key E for two seconds
and it will be activated for 10 minutes after which it will return to the previously set speed.
When the function is active the LED flashes. To interrupt it before the 10 minutes have

Advertising