Gitzo GM2542 Series 2 Carbon Fiber Monopod - Manual (Page 6)

English
FIG. 1 – Extending the leg
Turn all the twist locks 1/4 of a turn at the same time,
then pull the leg down and tighten the twists individually.
FIG. 2 – Reversible 3/8” or 1/4” fixing screw
FIG. 3A – Replaceable foot
In case the foot becomes worn, it can be replaced easily
with a new foot (available as a spare part).
FIG. 3B – Interchangeable foot
Interchangeable with Gitzo universal foot accessories.
FIG. 4 – Maintenance
The internal thread of the leg locks can be cleaned and
greased to perform optimally. Turn the twist lock until the
thread is exposed, and remove any dust or sand with a
cloth. Apply a small amount of grease (sold separately:
GSGREASE02) onto the thread, and turn the twist lock
until it is locked.
In addition to reading these instructions, it is also
important to read the general instructions printed on the
warranty card packed with your product.