EAW AS660e - Manual

SPECIFICATIONS AS660e
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS660e/2 pp October 2001 Printed in USA
A bi-amplified (passive mid/high crossover) or tri-amplified
3-way full range system in a trapezoidal enclosure. Includes
2x 12-in woofers (separated vertically), a horn-loaded 10-in
MF cone with Radial Phase Plug™ and a 1.4-in exit/2.5-in
voice coil HF neodymium compression driver on a 60° x 45°
constant directivity horn.
The AS660e is engineered for use in permanent installations.
Optimized subsections provide excellent full range frequency
response in a medium format enclosure. Includes comprehen-
sive 3/8"-16 mounting/suspension points. Six year warranty.
Applications include
Stadiums Arenas
Performing Arts Centers Houses of Worship
Frequency Response (Hz)
±3 dB 67 Hz to 15 kHz
-10 dB 50 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Passive MF/HF 107
LF 102
MF 109
HF 109
Impedance (Ohms)
Passive MF/HF 8
LF 4
MF 8
HF 8
Power Handling (Watts, Continuous)
Passive MF/HF 450
LF 800
MF 400
HF 125
Recommended High-Pass Frequency
24 dB/Octave 40 Hz
Calculated Maximum Output (dB SPL @ 1m)
Passive MF/HF Peak 139
LF Peak 137
MF Peak 141
HF Peak 136
Passive MF/HF Long term 133
LF Long Term 131
MF Long Term 135
HF Long Term 130
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 60
Vertical 45
Product Group I
System Configuration 3-way, full range
Powering Configuration(s) Bi-amplified (passive MF/HF
crossover) or tri-amplified
LF Subsystem & Loading 2x 12-in, vented
MF Subsystem & Loading 1x 10-in cone, Radial Phase
Plug™/ horn-loaded
HF Subsystem & Loading 1x 1.4-in exit/2.5-in voice
coil neodymium compression
driver on constant directivity horn
Cabinet Type (shape) Trapezoidal
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant textured black
paint
Connectors 2x 6-Contact terminal barrier
strip, jumpers used for powering
configuration
Suspension Hardware (18) 3/8"-16 threaded mounting/
suspension points (4 each on
top, bottom and sides, 2 on back)
Grille Powder coated perforated steel
PHYSICAL